Position Side Hole Puncher Machine , Inlay Sheet Position Hole Die Cutter YHP-S

Position Side Hole Puncher Inlay Sheet Position Hole Die Cutter YHP-S

1. Machine Introduction of Position Side Hole Puncher Inlay Sheet Position Hole Die Cutter YHP-S

The machine is specially designed for punching the side positioning holes (two holes) on INLAY middle sheet at the same time.

It can punch 2-3 sheets per time to ensure higher work efficiency.

This hole punching machine uses to punch of the positioning hole and the clearance hole on PVC, PETG and ABS sheets with different thickness and size for contactless cards (RF cards). Control by the servo system and use the precision mold to punch, which ensure the quality of the products and improve productivity, only need one operator.

In the machine structure, the machine is easy to operate and maintain, which enhances the service life of machine and productivity.

2. Feature Parameters of Position Side Hole Puncher Inlay Sheet Position Hole Die Cutter YHP-S

Technical parameters

1. Speed: 800-1000 sheets per hour.

2. Operator needed: 1 person

3. sheet Layout:3*8

4. Punched hole diameter: 3mm

5. Hole central point distance:350mm

6. Compressed air: 5-6kg/cm2, around 5 liters/minute

7. Gross weight: around 50 kg

8. Dimension: L560×W500×H320

3. More Features of  Position Side Hole Puncher Inlay Sheet Position Hole Die Cutter YHP-S

1. Punch the hole for the chip of the inlay, which ensures the modules and the PVC embedding on the same plane and protects the chips.

2. The machine has two molds with two different sides, it can be used for different production technology, just press the switch to select the mold.

3. The pitch and the size of the punching mold can be adjusted according to the requirement.

4. The cylinder drives punching mold up and down with the low noise.

5. PLC control and can be punched different layout,

6. Use the precision mold to punch and ensure the quality of the products.

7. The life span of the mold is: It only needs to be whetted every two million times punching

8. Punching with the low noise.

9. Materials are loaded using the dowel pin, easy to adjust.

10. Use the servo system to position which ensure the position accurately

11. Use the PLC and the touch screen, stable and visualized.

12 .HMI system make communication easier.

4. Our service :
Pre-sale
(1) Professional suggestions (raw material matching, machine selection, the condition of building factory, feasibility analysis for brick machine production line)
(2) Device model choice (recommend the best machine according to the raw material, capacity and the size of brick)
(3) Efficient on-line service
(4) Welcome to visit our factory and production line any time, if you need, we can make invitation letter for you.
(5) Introduce the company file, product categories and production process.
Sale:
(1) Update the production scheduling in time
(2) Quality supervision
(3) Product acceptance
(4) Shipping on time
After-sale:
(1) The engineer will guide to carry out the plant at the clients side if needed.
(2) Set up, fix, and operate
(3) offer training to the operator until they are satisfied at clients side.
(4) Skill support the whole using life.
(5) Recall clients regularly ,get feedback in time ,keep well communication with each other

5. Guarantee
(1)We can supply one year guarantee period for our card machines, if the client have any question ,they could contact our service department any time ,we will supply efficient service .
(2)Within one year ,if the client meet the unsolvable questions ,we can make site supporting.